A grease gun is a tool commonly used in industries, workshops, or garages for greasing. Its objective is to apply grease, through an opening, to a specific point. Today we will discuss how to use a cordless grease gun properly.
Lubrication is a very important part of industrial processes, as many factories use machinery with moving parts, requiring a fluid film that protects from friction, facilitates movement, and reduces friction. In short, extend its life.
So, one of the most popular tools in any shop or industrial facility is the grease gun. You likely use a grease gun regularly without giving it much thought, but it’s significant to understand how it works, what it’s used for, and how to use it properly.
Most maintenance departments offer various types of grease guns, which might result in cross-contamination and inaccurate dispatch volume measurements. We’ll look at how this volume is measured to ensure proper use.
Safe Way to Use a Cordless Grease Gun
In general, machinery must have a proper lubrication procedure to operate practically silently while also ensuring the equipment’s lengthy useful life. Grease guns are one of the most frequent techniques to ensure proper lubrication in the industrial and agricultural worlds, as well as in general in any sector where machinery is employed.
Grease guns, despite their ubiquitous usage in the lubrication process, are tools that require respect, and the use and safety regulations recommended by their manufacturers must be followed to avoid injury.
So far, there are four different types of grease guns on the market, each with its unique set of instructions for usage, but all with general guidelines for the proper use and workplace safety.
There are manual grease guns, which are the most frequent and, without a question, the most cost-effective. They are actuated by levers or triggers. Pneumatics are pneumatic devices that use compressed air to operate. There are also electric grease guns, which offer a steady flow of grease and are commonly employed as a pneumatic alternative.
Depending on the requirements, there are various types of cordless grease guns:
- Metallic grease guns.
- Ball joint grease guns.
- High-pressure grease guns.
- Grease guns with the counter.
The Proper Steps to Use the Cordless Grease Gun
Before being able to use it, make sure that it is loaded, if not, the first thing to do is look for mobile lubrication equipment and carry out the following steps:
Check gun tips and mobile equipment for dirt, contamination, or damage.
Put the nozzle of the gun and the equipment at the same angle, press down, and position the gun on the equipment. The mobile equipment will unlock when it is properly attached to the gun.
Pump the gun until grease comes out of the gun opening.
Unscrew the gun from the mobile equipment.
Tips for Proper Operation
Once the pistol is reloaded it is ready to use.
In general, grease guns work at high pressure, so special care must be taken when handling them. You must wear safety gears. It is also important that all gun components are calibrated to the same pressure that will be applied, for this reason only hoses specified by the grease gun manufacturer should be used.
A common accident situation occurs when the gun has not been used for a long time. The residual fat that was left from the last time has solidified, plugging the outlet of the new fat, so the pressure increases and the fat shoots out, damaging, injuring what is around it: fingers and hands. If this happens, you should consult a doctor soon.
To avoid the problem, it is advisable to clean it well with warm water after use and let it dry completely before storing.
Each grease gun has a different design. Some only use a certain type of grease and do not properly pump thicker grease through their nozzle. Each type of gun requires the correct type of grease and cartridge to function properly. When buying new grease cartridges, it is advisable to bring the old ones to avoid purchasing the wrong ones.
Since it is possible to get grease stains while working it is best to wear work clothes while handling the gun.
Using a grease gun correctly is not as simple as it sounds. Effective lubrication requires training, ranging from the application of lubrication to knowing what to do in the face of the effects of an incorrect application.
The person who will handle the gun must know each of the elements of the machine that will be greased/lubricated, as well as the grease gun that will be used to fulfill the task.
Lastly, greasing a machine that is running is not recommended. Nor go over or under moving components to lubricate them. It is better to wait for the machine to stop working to do it.
Recommendations:
From the article above, we described how to use a cordless grease gun properly. But the users should keep in mind some important points mentioned below:
Clean the oiler, wash it properly with warm water, and let it dry fully for smooth functioning. Before storing the grease gun, clean it thoroughly and allow it to dry.
Mixing lubricants is not a good idea. Use different guns for different types of lubricants.
It can be difficult to work with grease guns, particularly grease nipples. Put on an apron or put on your work clothes.
When increasing pressure, be cautious because excessive lubrication might harm bearing seals, guards, and other components.
A Content Writer and A Reviewer at The Strategy Watch